The Italian community dedicated to the BMW C1ITENESDEContact us ↗
Historic club banner featuring a BMW C1
Visit the forum ↗The beating heart of the club
THE MODELS / SPECIAL EDITIONS

BMW C1 Swiss Edition

The special edition for the Swiss market, in the club’s historic archive.

Join the discussion in the forum
BMW C1 Swiss Edition · original image 1
BMW C1 Swiss Edition

The club’s description

Text from the historic profile: descriptions, comparisons and references reflect the period in which it was originally published.

The Swiss Edition, a special edition for the Swiss market, is offered in all the solid paint colours from the entire BMW range (shown here in red). Its generous standard equipment deserves a mention, including ABS, a spacious storage compartment and a luggage mounting kit. Otherwise, the C1 Swiss Edition can be personalised in the same way as other C1s, and shares their mechanical components and passive safety systems.

Engine and transmission

SpecificationOriginal data
TypeSingle-cylinder, 4-stroke
Valves4
Displacement125 cm3 (cc)
Bore × stroke56.4 mm × 50.0 mm
Power11 kW/15 CV at 9250 rpm
Compression ratio13,0 : 1
Maximum torque12 Nm at 6500 rpm
CoolingLiquid-cooled, with auxiliary electric fan
Fuel supply/engine managementBMS (BMW Management System)
Catalytic converterThree-way, regulated by a lambda sensor
TransmissionBelt drive with engine-speed-dependent continuously variable automatic transmission
Fuel:Premium unleaded, 95 ROZ

Electrical system

SpecificationOriginal data
Alternator400W
Battery12 V/14 Amp/h

Dimensions and weights

SpecificationOriginal data
Width2,075 mm
Length1026 mm
Height1766 mm
Seat height701 mm
Fuel tank capacityApprox. 9 litres
Unladen weight, ready to ride with a full tank185 Kg
Maximum permissible total weight360 Kg (note: the top case must not exceed 22 Kg)

Performance and fuel consumption

SpecificationOriginal data
Top speedApprox. 104 Km/h
Fuel economy, km per litre at 90 Km/h34.48 Km/l (equivalent to 2.9 l per 100 Km)
Acceleration from 0 to 50 km/h5.9 sec

Chassis and brakes

SpecificationOriginal data
Front suspensionBMW Telever system with aluminium longitudinal arm
Rear suspensionSwingarm with integrated transmission unit and vibration isolation using ball bearings
Total travel75 mm
Wheel travel85 mm
Front brakeHydraulic single disc (220 mm dia.) with floating twin-piston calliper
Rear brakeHydraulic single disc (220 mm dia.) with floating single-piston calliper
Front wheelLight-alloy rim, 3.5'' x 13''
Rear wheelLight-alloy rim, 3.5'' x 12''
Front tyre120/70-R 13 (tubeless)
Rear tyre140/70-R 12 (tubeless)

Information from the BMW website. Copyright BMW MOTO, Munich, Germany.

BMW C1 CLUB ITALIAOne community. One passion. So many roads.Write to the club ↗